News

1. Cement Mortar Hydroxypropyl MethylCellulose helps to increase the dispersion of cement-sand, greatly improve the plasticity of mortar and water-holding capacity, prevent cracks and enhance the strength of cement. Hydroxypropyl Methylcellulose can improve the bonding strength of mortar, even in high temperature environment, it can ensure sufficient moisture of mortar, and make cement fully hydrated, […]

Feeling a little lost on where to find the best price for Methyl Hydroxyethyl Cellulose or MHEC? Sometimes, it is not that easy to make the right decision as to which Methyl Hydroxyethyl cellulose (MHEC) Manufacturer offers good value for your money. This article will, therefore, help guide you through the estimation process to get […]

Hydroxypropyl methyl cellulose HPMC is mainly used as a high-efficiency water-retaining agent in building dry-mixed mortar. It can make the mortar have good plasticity and flexibility and improve the bond strength of the mortar. At the same time, HPMC can reduce the bleeding rate and stratification degree of mortar, improve the cohesion and flow resistance of […]

If the hot soluble type (Non-surface treated) HPMC is added directly to the water, agglomeration will occur before dissolution. However, dissolving in this way is very slow and difficult. Here we recommend three dissolution methods for end users based on different applications： 1 Hot water dissolution method: Since HPMC is not dissolved in hot water, […]

Improved processability One of the most notable advantages of using HPMC in tile adhesives is increased processability. HPMC acts as a thickener, providing the glue a smooth, creamy texture that is easy to apply. This uniformity enables for even spreading, minimizing the possibility of air pockets or uneven adhesion. As a result, tilers can work […]

1. Water Retention HPMC has excellent water-retaining properties. When mixed with skim coat materials, it helps to keep the mixture workable for extended periods. This is particularly advantageous during application, as it prevents the mixture from drying out too quickly, allowing for even and consistent application. The enhanced workability reduces the risk of cracking and […]

How to make wall putty paste? Making wall putty paste requires only three steps: preparing materials, mixing, and checking. 1. Prepare Raw Materials. Gather all the materials you need. White cement, RDP powder, fillers such as calcium carbonate. Measure the right amount of HPMC hydroxypropyl methylcellulose and add it to wall putty formulation. Prepare some water. 2. Mixing […]

Hydroxyethyl Methyl Cellulose (HEMC) is also named as Methyl Hydroxyethyl Cellulose (MHEC). It is a white, grayish-white, or yellowish-white granules. It is a non-ionic cellulose ether derived from the addition of ethylene oxide to methylcellulose. It is produced from a natural renewable polymer such as wood pulp or cotton. HEMC can be used as a […]

PROPERTIES OF HPMC for Drymix Mortar: * Particle size: 98.5% passes through 100 mesh; 100% passes through 80 mesh. * Charring temperature: 280-300℃. * Bulk density: 0.25-0.70 g/cm3 (Usually around 0.5 g/cm3 ) * Real specific gravity: 1.26-1.31. * Browning temperature: 190-200℃. * Surface tension: (2% water solution) 42-56dyn.cm. * Properties: Dissolved in water and some organic […]