hydroxypropyl methylcellulose HPMC in Plastering MortarFebruary 2nd 2023
HPMC manufacturer-Dissolution Method and Precautions for HPMC
Hydroxypropylmethylcellulose (HPMC) is a semisynthetic, viscoelastic polymer that is widely used in the pharmaceutical and food industries as a thickener, binder, and controlled release agent. It is a white, tasteless, and odorless powder that is soluble in water and many organic solvents, but it is not soluble in oil.
HPMC for self leveling mortar
Dissolving HPMC is a simple process, but there are a few precautions that should be taken to ensure that the polymer is properly dissolved and that the resulting solution is stable.
Use Hot Water
HPMC is more soluble in hot water than in cold water, so it is generally recommended to use water that is at least 70°C (158°F) to dissolve the polymer. This will help to ensure that the HPMC is fully dissolved and that the solution is clear and free of any undissolved particles.
Add the HPMC Slowly
It is important to add the HPMC to the water slowly, while stirring constantly, to ensure that it is evenly distributed throughout the solution. If the HPMC is added too quickly, it may form clumps or lumps that are difficult to dissolve.
Use a High-speed Mixer
A high-speed mixer, such as a high-shear homogenizer or a Waring blender, can be used to help dissolve the HPMC more efficiently. These types of mixers create high levels of shear forces that can help to break up any clumps of HPMC and improve the solubility of the polymer.
Check the PH of the Solution
HPMC is more soluble in solutions with a neutral pH (around 7), so it is important to check the pH of the solution before adding the HPMC. If the solution is too acidic or alkaline, it may be necessary to adjust the pH before adding the polymer.
Allow the Solution to Cool
After the HPMC has been dissolved, it is important to allow the solution to cool to room temperature before using it. If the solution is too hot, it may cause the HPMC to degrade or lose its viscosity.
Store the Solution Properly
If the solution is not going to be used immediately, it should be stored in a sealed container at a cool, dry place. HPMC solutions are generally stable for up to one year, but they should be used as soon as possible to ensure the best quality.
In summary, dissolving HPMC requires the use of hot water, a slow and steady addition of the polymer, and a high-speed mixer to ensure that the solution is stable and free of any undissolved particles. It is also important to check the pH of the solution and to allow the solution to cool before using it, and to store the solution properly if it is not going to be used immediately.