News

Cement-undefinedbased ceramic tile sticky happens to be the largest putting on unique dry-undefinedblended mortar. This really is a cement-undefinedbased cementitious material compounded by rated aggregates, normal water-undefinedpreserving substances, earlier power brokers, latex powder and other organic or inorganic preservatives. combination. Usually, it only needs to be mixed with drinking water when applied. In contrast to […]

Cellulose is a key contributor to the smoothness and consistency of paints, and is a major component of the cell walls of green plants. Processed and modified, cellulose can be used to thicken and stabilize a variety of water-based products, including paints. Due to the complexity of each paint formulation, cellulose is required for efficient […]

We all know that the main function of cellulose is water retention and thickening, and the water retention rate is especially important in the application. The most important main material for putty and mortar is cement, which is a water-hard material and must have enough water to make it harden completely. So sometimes putty on […]

Cellulose HPMC construction grade powder, also known as hydroxypropyl methyl cellulose (HPMC), is a water-soluble cellulose ether widely used in gypsum-based products due to its unique properties that improve the performance and quality of gypsum. Key Properties of Cellulose HPMC Construction Grade Powder for Gypsum: Water Retention: HPMC effectively retains water in gypsum, preventing premature […]

MC is methyl cellulose: is refined cotton after alkali treatment, methane chloride as etherifying agent, through a series of reactions to make cellulose ether. Generally, the degree of substitution is 1.6~2.0, and the solubility varies with the degree of substitution. Belongs to nonionic cellulose ether.

Especially in summer, construction is very frequent in this season, and there is a large demand for cellulose. Manufacturers must also do a good job of moisture-proof storage while mass production. When storing cellulose in summer, we should pay attention to moisture prevention,

Cellulose for concrete. It is made from a special plant species in the alpine region through a series of unique chemical treatments and mechanical processing. It has the characteristics of natural hydrophilicity, high strength and high modulus, because it is a plant Cells naturally divide and grow and are not made artificially, so that the surface has a strong grip.

First of all, its own production capacity will have a certain impact on the choice of cellulose.

Tile adhesive has high requirements for cellulose. After all, the poor quality of tile adhesive is not only the unsatisfactory engineering effect, but also safety problems.

Generally, in the synthesis of hydroxypropyl methylcellulose, the refined cotton cellulose is treated with alkali solution at 35-40°C for half an hour, squeezed, the cellulose is crushed, and appropriately aged at 35°C, so that the resulting alkali fiber is averagely polymerized The degree is within the required range.