Working hours:Mon - Fri 9.00 - 18.00 Call Us: (+86)15628905877

REDISPERSIBLE POLYMER POWDER - China HPMC manufacturer_SLEO Chemical Technology Co., Ltd.

June 2, 2022

Building energy consumption is a major consumer of energy. In the building maintenance structure, the exterior wall of the building accounts for more than 15% of the total energy consumption of the maintenance structure. Therefore, external wall insulation has become the focus of building energy conservation. The External Wall Insulation System, hereinafter referred to as EIFS, is a coating layer constructed on the outside of a building’s external wall. It provides thermal insulation, weather resistance and rich finishes in the form of an overall multi-layer composite system.

The advantage of external wall insulation is that the thermal insulation system is placed on the outside of the external wall, which greatly reduces the temperature difference that the main structure bears, protects the structural wall, and can effectively eliminate cold (hot) bridges. It also helps to extend the structural life of the building. The external thermal insulation system of an Expandable Polystyrene (EPS) foam-pallet thermal insulation mortar is composed of an interface layer, thermal insulation layer, protective layer and finish layer. It has the characteristics of good thermal performance, convenient construction, and the ability to adjust the wall thermal resistance and engineering cost by changing the density and thickness of the thermal insulation mortar. This article primarily discusses the effect of redispersible polymer powder (RDP) on the performance of EPS foam-pallet thermal insulation mortar.

The dosage and serial number of RDP polymer:

1.The impact on the strength of thermal insulation mortar

The highly flexible and highly elastic polymer network film formed by redispersible polymer powder (RDP significantly improves the performance of the thermal insulation mortar, especially the tensile strength. When an external force is applied, due to improvements in the overall cohesion of the mortar and the flexibility of the polymer, the occurrence of microcracks will be offset or slowed down.

EPSFrom Table 1, the tensile strength of the thermal insulation mortar increases with the increase of the dosage of Wacker polymer; the flexural strength and compressive strength decrease to a certain extent with the increase of the dosage of RDP, but it can still meet the requirements of external wall finishes. The relatively small ratio of bending-compressive strength reflects the greater flexibility and deformation performance of the thermal insulation mortar.

2.The dosage of RDP and the workability of mortar

The test results show that with the increase in the dosage of RDP, the cohesion and water retention are significantly improved, and the workability is optimized. When the dosage of RDP reaches 25%, it can fully meet the construction needs. If the dosage of RDP is too high, the viscosity and fluidity of the EPS foam-pallet thermal insulation mortar will be too high, the resulting materials will not be conducive to construction, and the cost of the mortar will increase.

Conclusion
The composite system of redispersible polymer powder (RDP) and other adhesives provides excellent flexibility and greatly improves the bonding tensile strength and construction performance of EPS foam-pallet thermal insulation mortar.

When the dosage of other adhesives is fixed, adding 2.5% RDP can produce the high-performance EPS foam-pallet thermal insulation mortar with a dry density of 232kg/m3, the thermal conductivity of 0.059 (W/(m⋅K)) and tensile bond strength of 0.33MP.

Our  redispersible polymer powder can replace Wacker RDP. The addition of RDP product can provide the following improvements to EPS thermal mortar:

EIFS insulation mortar

Improved mortar strength and flexibility
Enhanced water retention and extended working time
Optimized product consistency and rheology
Improved hydrophobicity
Improved workability


May 31, 2022

The polymer film formed by Redispersible polymer powder has good flexibility. A film is formed in the gaps and surfaces of the cement mortar particles to form a flexible connection. So that the brittle and hard cement mortar becomes elastic. The mortar added with Redispersible polymer powder is several times higher in tensile and flexural resistance than ordinary mortar.


May 24, 2022

Redispersible Polymer Powder/Vae for Wall Putty Mortar VAE RDP is a polymer powder with multipurpose, widely used in joint filler mortar , wall putty/wall skim coat and binder as a film forming agent, which is designed to improve the workability, adhesion, flexibility, anti-permeability of construction dry mixed mortar.


May 17, 2022

Dry mortar generally uses Portland cement as the cementing material, and the amount of cementing material generally accounts for 20% to 40% of the dry powder mortar; most of the fine aggregate is quartz sand, and the amount is large, and it generally needs to be dried and screened.


May 11, 2022

Redispersible Polymer powder is mainly used in all kinds of dry-mix mortar, such as wall putty powder, ceramic tile adhesive, ceramic tile jointing agent, dry powder interface agent, exterior insulation mortar, self-leveling mortar, mending mortar, decorative mortar, waterproof mortar, etc..


LOCATIONS

Office

19/F, Block B, Hisense Tianchen Center, 299 Tianchen Road, Jinan Area (Pilot Free Trade Zone), Shandong, China
+ 8615628905877

https://www.sleochem.com

info@sleochem.com

LOCATIONS

Factory

Shenze Industrial Park, Shijiazhuang 052560, Hebei, China
GET IN TOUCH

Follow Our Activity