News

Redispersible latex powder plays multiple roles in our lives. It can be used as a coagulant in mortar or as a polymer mortar in cement. It is versatile. Below we have summarized the six characteristics of redispersible latex powder in our lives, and hope that it can be helpful to everyone:

Redispersible latex powder is usually white powder, and its composition mainly includes:

The use of mortar as an insulation material in building construction can improve the insulation performance of the outer wall insulation layer, reduce indoor heat loss, and avoid uneven heating between rooms, so it has been widely used in building construction.

The film of redispersible latex powder is elastic and tough, and it is in the rigid framework formed by the hydration of cement mortar. Between cement mortar particles and particles, it has a function similar to a movable joint, which can withstand high deformation loads, reduce stress, and improve tensile and bending resistance.

Redispersible latex powder is a water-soluble white or white flowable powder copolymer of ethylene and vinyl acetate. It uses polyvinyl alcohol as a protective colloid. It is commonly used in cement, gypsum, and mortar. It is redispersible Latex powder has outstanding waterproof performance, good bonding strength,

Bonding mortar: to ensure that the cement mortar will bond the wall and the epoxy wallboard with strong adhesion. Improve the bonding compressive strength.

Plastering mortar: to ensure the impact toughness, crack resistance and impact resistance of the system.

1. Appearance method: Use a glass rod to thinly and evenly cover a small amount of redispersible latex powder on the surface of a clean glass plate. The redispersible latex powder manufacturer places the glass plate on white paper and inspects the particles visually. The appearance of foreign matter and coagulum.

The redispersible latex powder is dispersed and formed into a mold and acts as a second adhesive to enhance the adhesion; the protective colloid is absorbed by the mortar system (it will not be destroyed after the mold is formed. Or twice dispersed); the polymerization of the mold As a reinforcing material, the resin is distributed in the entire mortar system, thereby increasing the cohesion of the mortar.

In the production of putty powder, we need to use redispersible latex powder. Using these latex powders can increase the bonding strength. We know that if we want to produce high-quality putty powder, the formula must be appropriate, and the additives inside must be used appropriate. We use redispersible latex powder to increase the strength, so how can we ensure this strength?